The GSE humidity controller is used to set the room humidity with a fan. Recommended for rooms where air enters and leaves. The fan controller keeps the room humidity and temperature under constant and negative pressure to prevent odors from escaping. Easy to control, setting the required humidity, temperature, min. speed and negative room pressure on four buttons. Three low-light LEDs indicate control status and on status.
Main characteristics:
It can also be used as a single air regulator for two fans if air enters naturally. The controller is ready to use and has a closed, waterproof cover, plugs with lids and a low voltage sensor, making it perfect even in wet rooms.
GSE humidity controller | |
---|---|
Controller dimensions (w x h x d) | 160 x 100 x 90 mm |
Housing (w x h x d) | 130 x 80 x 70 mm |
Designed for | 2 x 200 W / TRIAC 2 x 10 A |
Temperature measurement | Digital sensor 5V Measures temperatures from (-55°C to +125°C) |
Temperature measurement accuracy |
0.5 ° C accuracy from -10 °C to +85 °C |
Humidity accuracy | ± 4,5% rh |
Pmax | 10 A |
VAmax | 2300 W |
Umax | 230 V, 50 Hz |
IP class | IP54 |
Settings range | temperature: 20C° - 30C° humidity: 30% - 100% minimum speed: off, 20% - 100% negative pressure: 100% - 50% |
Sve informacije koje se nalaze ovde su informacije od strane proizvođača.
Proizvođač zadržava pravo na izmene ili promene informacija bez predhodne najave i bez ikakve odgovornosti.
Za promene, odstupanja ne možemo da prihvatimo odgovornost.
Slika koja prikazuje određeni proizvod je ilustracija, u stvarnosti proizvod može da odstupa od ilustrovane slike.
GSE digital humidity controller komentari
Uopšte nema komentara za proizvode.