Loading...
HUF EUR
 SimplePay INFO
×

Kedves Vásárlóink!

Csomagfeladásunk fennakadás nélkül üzemel, de az egy napos kiszállási időt nem minden esetben tudjuk garantálni!

Üzletünk a megszokottak szerint nyitva van!

Babylon Grow shop
36/20/298-8250
https://babylon-grow.eu
info@babylon-grow.eu
Milwaukee PH51 digital pH meter

Milwaukee PH51 digital pH meter

 In Stock

15 991.-Ft

 The price of the product may differ from the price of the product available in our store.
The store's stock is different from the one here.
Please inquire: +36 (20) 381-2802
Product code: GRO3151 Warranty: According to law, price band* Uputstvo za upotrebu (englesko)

Milwaukee PH51 digital pH meter description

The Milwaukee PH51 digital pH meter is a waterproof pH tester. Automatically performs temperature compensation (ATC) for each pH measurement. The meter can be calibrated at two points. Accurate measurements are displayed directly on the LCD display, and the MA73600 electrode supplied with the meter is easy to replace. The closed temperature sensor allows fast and accurate temperature measurement and compensation.

Technical details:

pH measuring range 0.0 to 14.0 pH
pH resolution 0.1 pH
pH accuracy (@ 25 ° C / 77 ° F) ±0.1 pH
pH calibration automatic, 2 points; pH 4.0 and pH 7.0 or pH 7.0 and pH 10.0
pH probe MA73600
Temperature compensation automatic
Battery 3 x 1.5V button cells
Battery life approx. 250 hours of use
Operating environment 0-50 ° C (32-122 ° F); RH 100%
Dimensions 165 x 30 x 30 mm
Weight 80 g

 

Electrode maintenance:

 

  • when not in use, rinse the electrode with water and place a few drops of Milwaukee storage solution in the protective cap and store it in it
  • never store the electrode in distilled or deionized water
  • if the electrode is left dry, soak the end in storage solution for at least one hour to reactivate
  • to prolong electrode life, it is recommended to clean monthly by immersing the tip in Milwaukee general cleaning solution for 30 minutes, then rinse thoroughly with tap water and recalibrate the meter


Use:
Two vessels are used for calibration. Both must be filled with the same calibration solution, but the first vessel is for rinsing the probe only, the actual calibration must be performed in the second vessel with the probe already rinsed. Always use fresh solution for calibration. This can be ensured with bag solutions for single calibration. If the instrument we use allows the use of several calibration solutions, it is advisable to use solutions close to the concentration of the measured sample. The EC meter does not need to be calibrated as often as the pH electrode, but regular monitoring is important as changes in the condition and aging of the probe can be compensated by calibration.

Instructions for use are available here.

 

Related products

  • Milwaukee pH 7.01 buffer 230ml
  • Milwaukee pH 4.01 buffer 230ml
  • Milwaukee PH51 digital pH meter komentari

    Uopšte nema komentara za proizvode.

    Sve informacije koje se nalaze ovde su informacije od strane proizvođača.

    Proizvođač zadržava pravo na izmene ili promene informacija bez predhodne najave i bez ikakve odgovornosti.

    Za promene, odstupanja ne možemo da prihvatimo odgovornost.

    Slika koja prikazuje određeni proizvod je ilustracija, u stvarnosti proizvod može da odstupa od ilustrovane slike.